Kapton tape 50mm
Bestseller
Kapton tape 50mm
€9.99
Ex Tax: €8.26
- Model:printbed-kapton50
- Gross weight:0.05kg
- Dimensions:10.00cm x 10.00cm x 5.00cm
Bestseller
About 1.75mm green PLA filamentThis is a nice green 3D printing filament..This pla filament can also be used in a 3D pen.Well coiled filamen..
€19.95
Ex Tax:€16.49
Bestseller
About 1.75mm black flexible filamentThis is a nice black flexible 3D printing filament.Well coiled filamentThis is the latest 'well coi..
€39.95
Ex Tax:€33.02
Bestseller
With 4 set screws and hexagon fastener..Number of teeth: 20.Innder diameter: 5mm.Width: 600.
..
€7.49
Ex Tax:€6.19
Bestseller
The most used type of timing belt for 3d printers. Length: 2m open ended.Width: 6mm.Pitch: 2mm..
€7.49
Ex Tax:€6.19
Bestseller
This thin kapton tape is used to insulate a hotend or to keep the thermistor on a heated bed in place. Width: 5mmLength: 33mH..
€3.99
Ex Tax:€3.30
All metal hotends have, as the name suggests, only metal parts and can thus withstand higher temperatures.This makes them excellent for printing ..
€24.99
Ex Tax:€20.65
Bestseller
100k NTC thermistor for measuring the temperature in a hot end or heated bed.With 1m wires attached.
..
€2.49
Ex Tax:€2.06
A sheet of PEI for printing on.Width: 220mm
Length: 220mm
Thickness: 0.5mmThis PEI sheet comes with 3M 468MP transfer tape for sticking ..
€19.95
Ex Tax:€16.49
A sheet of PEI for printing on.Width: 220mm
Length: 220mm
Thickness: 0.5mmThis PEI sheet comes with 3M 468MP transfer tape for sticking ..
€19.95
Ex Tax:€16.49
New
Suitable for 12V and 24V. With cables, LEDs and resistor.Connected for 12V, but i think the cables are a bit thin...
€14.99
Ex Tax:€12.39
3mm thick aluminium plate.Suitable for 12V and 24V No LEDs or resistor.See: http://reprap.org/wiki/PCB_Heatbed#MK3_ALU-Heatbe..
€19.99
Ex Tax:€16.52
Wood filament is a relatively new material for 3D printing Advantages of wood filament:Wood filament does not need a heated printb..
€44.95
Ex Tax:€37.15
Wood filament is a relatively new material for 3D printing Advantages of wood filament:Wood filament does not need a heated printb..
€44.95
Ex Tax:€37.15
Bestseller
Out Of Stock
PVA (Polyvinyl alcohol) is a relatively new material for 3D printing Advantages of pva filament:Pva dissolves in water. Making it ..
€39.95
Ex Tax:€33.02
About 3.0mm black nylon filamentThis is a nice black 3D printing filament. This filament can be used in Ultimaker 3D printers.Why buy from u..
€34.99
Ex Tax:€28.92