All-metal hotend 1.75mm / 0.4mm
All-metal hotend 1.75mm / 0.4mm
€24.99
Ex Tax: €20.65
- Model:hotends-allmetal1704
Bestseller
With 4 set screws and hexagon fastener..Number of teeth: 20.Innder diameter: 5mm.Width: 600.
..
€7.49
Ex Tax:€6.19
Bestseller
The most used type of timing belt for 3d printers. Length: 2m open ended.Width: 6mm.Pitch: 2mm..
€7.49
Ex Tax:€6.19
Bestseller
Kapton tapeA good printing surface for ABS (110℃) as well as PLA (60℃).The "wet mount method" as shown on https://www.youtube.com/watch?v=yV..
€9.99
Ex Tax:€8.26
Bestseller
This thin kapton tape is used to insulate a hotend or to keep the thermistor on a heated bed in place. Width: 5mmLength: 33mH..
€3.99
Ex Tax:€3.30
About 1.75mm naissant ABS filamentThe color of this 3D printing filament is hard to describe. |The manufacturer called it 'sky blue' but in truth..
€19.95
Ex Tax:€16.49
Bestseller-21 %
The most commonly used stepper driver for 3D printers.with heatsink1/16th micro stepping..
€1.98€2.50
Ex Tax:€1.64
Bestseller
100k NTC thermistor for measuring the temperature in a hot end or heated bed.With 1m wires attached.
..
€2.49
Ex Tax:€2.06
12V 40W heater cartridge for a hotend length: 20mmDiameter: 6mmCapacity: 40W..
€4.99
Ex Tax:€4.12Bestseller
This thin kapton tape is used to insulate a hotend or to keep the thermistor on a heated bed in place. Width: 5mmLength: 33mH..
€3.99
Ex Tax:€3.30
All metal hotends have, as the name suggests, only metal parts and can thus withstand higher temperatures.This makes them excellent for printing ..
€24.99
Ex Tax:€20.65
New
This extruder grips the filament from 2 sides instead of from only one side as most standard extruders do. |It also has a 1:3 gear reduction, allowing..
€14.99
Ex Tax:€12.39