Menu
Your Cart

3.0mm orange PLA filament f&m

3.0mm orange PLA filament f&m
3.0mm orange PLA filament f&m
3.0mm orange PLA filament f&m
-25 %
3.0mm orange PLA filament f&m
3.0mm orange PLA filament f&m
3.0mm orange PLA filament f&m
3.0mm orange PLA filament f&m
€14.99
€19.95
Ex Tax: €12.39
  • Stock: In Stock
  • Model: pla-3.0-oranje-fenm
  • Weight: 1.30kg
  • Dimensions: 18.00cm x 18.00cm x 12.00cm

About this filament

All of our 3.0mm PLA filaments are of excellent quality and are being used in Ultimaker and in different types of RepRap 3d printers. Convince yourself!

About PLA filament

PLA 3D printing filament of 3.0mm thickness is the single most popular material for 3d printing at the moment..This is mostly because PLA is a biologically degradable material. Because it does not spread uncomfortable odours while printing and because it is easy to use. For example PLA filament does not warp (curl up) during printing and it can be used without the use of a heated bed. After printing PLA is tough and a bit glossy.

Material properties

 

Parameter PLA Unit
Density 1.25 g/cm3,21.5ºC
Melt Flow Index 5 10min,2.16kg
Melting point    
Heat-Deflection-Temperature 50 ºC,0.455MPa
Yield Sterkte 45 MPa,5mm/min
Impact strength 5 KJ/m2
Tensile Break 20 %
Diameter   mm

 

filament specificaties
Net weight1.0kg
Diameter and tolerance3±0.05mm
Recommended printing temperature190-220ºC

Write a review

Note: HTML is not translated!
Bad Good
Captcha